Measuring Short-Term Exposures to H2O2 Among Exposed Workers; A Feasibility Study.

Hydrogen peroxide (H2O2) is a strong oxidizing agent often used in hair coloring and as a component in disinfecting and bleaching processes. Exposures to H2O2 generate reactive oxygen species (ROS) that can cause significant airway irritation and inflammation. Even though workers have reported symptoms associated with sensitivity and irritation from acute exposures below the H2O2 occupational exposure levels (OELs), a lack of sensitive analytical methods for measuring airborne concentrations currently prevents evaluating low or peak H2O2 exposures. To fill these gaps, we propose two different sensitive approaches: (i) luminol chemiluminescence (CL) to specifically measure H2O2; and (ii) photonic sensor method based on the ferrous-xylenol orange assay to evaluate total oxidative potential (OP), a measure of ROS in sampled air. We chose two exposure scenarios: hairdressers preparing and applying hair color to clients (both in simulated and field environments) and workers operating disinfecting cycles at a bottling company. Hair coloring took about 1 h for each client, and the application of the coloring product generated the highest H2O2 concentrations. OP values were highly correlated with H2O2 concentrations (CL measurement) and allowed peak measurements as low as 6 µg m-3 of H2O2 concentrations. The bottling company used a disinfectant containing H2O2, acetic acid and peracetic acid (PAA) in an enclosed process. The photonic sensor was immediately saturated. The CL results showed that the process operator had the highest exposures during a 15-min cycle. There is still a need to develop these direct reading methods for operating in the field, but we believe that in the future an OEL for OP could protect workers from developing airway irritation and inflammation by reducing exposures to oxidizing chemicals.

Profiling and imaging of forensic evidence - A pan-European forensic round robin study part 1: Document forgery.

The forensic scenario, on which the round robin study was based, simulated a suspected intentional manipulation of a real estate rental agreement consisting of a total of three pages. The aims of this study were to (i) establish the amount and reliability of information extractable from a single type of evidence and to (ii) provide suggestions on the most suitable combination of compatible techniques for a multi-modal imaging approach to forgery detection. To address these aims, seventeen laboratories from sixteen countries were invited to answer the following tasks questions: (i) which printing technique was used? (ii) were the three pages printed with the same printer? (iii) were the three pages made from the same paper? (iv) were the three pages originally stapled? (v) were the headings and signatures written with the same ink? and (vi) were headings and signatures of the same age on all pages? The methods used were classified into the following categories: Optical spectroscopy, including multispectral imaging, smartphone mapping, UV-luminescence and LIBS; Infrared spectroscopy, including Raman and FTIR (micro-)spectroscopy; X-ray spectroscopy, including SEM-EDX, PIXE and XPS; Mass spectrometry, including ICPMS, SIMS, MALDI and LDIMS; Electrostatic imaging, as well as non-imaging methods, such as non-multimodal visual inspection, (micro-)spectroscopy, physical testing and thin layer chromatography. The performance of the techniques was evaluated as the proportion of discriminated sample pairs to all possible sample pairs. For the undiscriminated sample pairs, a distinction was made between undecidability and false positive claims. It was found that none of the methods used were able to solve all tasks completely and/or correctly and that certain methods were a priori judged unsuitable by the laboratories for some tasks. Correct results were generally achieved for the discrimination of printer toners, whereas incorrect results in the discrimination of inks. For the discrimination of paper, solid state analytical methods proved to be superior to mass spectrometric methods. None of the participating laboratories deemed addressing ink age feasible. It was concluded that correct forensic statements can only be achieved by the complementary application of different methods and that the classical approach of round robin studies to send standardised subsamples to the participants is not feasible for a true multimodal approach if the techniques are not available at one location.

Forensic Analysis of Commercial Inks by Laser-Induced Breakdown Spectroscopy (LIBS).

Laser-induced breakdown spectroscopy (LIBS) was tested for all of the relevant issues in forensic examinations of commercial inks, including classification of pen inks on one paper type and on different paper types, determination of the deposition order of layered inks, and analysis of signatures and toners on one questioned document. The scope of this work was to determine the potential of a single LIBS setup that is compatible with portable instruments for different types of ink analysis, rather than building a very large database for inks and papers. We identified up to seven metals characteristic for the examined inks, which allowed to fully discriminate all eight black inks on one type of printing paper. When the inks were tested on ten different papers, the correct classification rates for some of them were reduced for reasons thoroughly studied and explained. The replicated tests on three crossing points, each one involving a pair of blue or black inks, were successful in five cases out of six. In the test simulating documents of forensic interest (questioned documents), LIBS was able to correctly identify the differences in three inks used for signatures on one of the three pages and the use of different printing inks on each page of the document.

New insights in forensic chemistry: NIR/Chemometrics analysis of toners for questioned documents examination.

Near-Infrared spectroscopy (NIRs) coupled to chemometrics was investigated for the first time as a new tool for the analysis of black toners to evaluate its application in forensic cases. Ten black toners from four manufacturers were included in this study and the acquired spectra were compared in order to differentiate toners. Multivariate statistical analysis based on Principal Component Analysis (PCA) was considered to develop a model of comparison of toners in questioned documents. Results demonstrated the capabilities of the approach NIR/Chemometrics to correctly identify toners when printed on different papers and to be not affected by the printing process. This study has shown that NIRs can be considered as a useful, fast, non-destructive tool providing the characterisation of toners in forensic caseworks.

A new, very sensitive method of assessment of ptaquiloside, the major bracken carcinogen in the milk of farm animals.

We describe a new method to detect trace levels of ptaquiloside (Pta), a major carcinogen of bracken fern in biological samples such as milk from farm animals. The method involves the absorption of analyte on carbograph followed by elution with solvents mixtures. The unstable analyte is then converted into Br-Pt (II), which is specific for Pta, as it is not a natural decay product of the glycoside in aqueous media. An internal standard, the Br-pterosine-d2, prepared in our laboratories has been used. Detection and quantification are possible with gas chromatography/mass spectrometry (GC/MS) in single ion monitoring mode (SIM). The detectable amount is in the range of ppb. The method allowed us to detect Pta not only in the milk from bracken fern-poisoned cattle but also, for the first time, in the milk from healthy farm animals such as sheep, goat, horse, and donkey mares.